Quantcast
Browsing all 446 articles
Browse latest View live

TSX 17 Failure

Hi there.    Im after some help with the replacement of a TSX 17 PLC. Unfortunately we do not have a copy of the program but it is a very vital machine. It has been running well for 25+ years. It...

View Article


Image may be NSFW.
Clik here to view.

Unity Pro LD Column Width?

Hi All Been trying to change the column width of an LD Section (is this possible?) Currently there are 11 columns - I would like a few more if possible In Tools -> Project Settings -> Program...

View Article


No Alarm name in HISTORY ALRM panel for Magelis XBT-N400

Hi, In Vijeo-Designer Lite, i configured a dialog table to exchange data between the PLC (ScadaPack 32) and the operator interface (XBT-N400). I added the alarm table function in this dialog table....

View Article

SoMachine, Web Visu download csv file

Hello I have a M251, running a webvisu. I have created a program to create a test report to a *csv file and store it on sd card. What I want to do next is to allow the user to download the * csv from...

View Article

Magelis xbt p021010

Hello everyone. equipment: I have an old Telemeqanique Premium as a PLC; and have a Magelis xbt p021010 as a scada. (it is old because, Nowadays I could not find any components for it) situation: For...

View Article


Image may be NSFW.
Clik here to view.

''INVISIBLE'' buttons in PROFACE

Hello,  I am doing PROFACE HMI touch screen projects, and I recently came up with an problem. I am using GP-PRO EX software to program and then later I would transfer the project to my PROFACE...

View Article

m221 input combination

Hello all! I'm new to programming and I would have some help. I have a Schneider m221 plc and i use somachine basic for programming. The question is the following. How can i make calculations like...

View Article

TSX 87 425

Dear All, I Have line working with TSX 87 425  I need to know type of software to access to plc program "does it working under (OS/2) and  can I make it on VM  type of connection cable how to get it ,...

View Article


Compile error

Hi Everyone,   Learning the ropes of SoMachine V4.2 (coming from Arduino and Ucontrollers), I am using a Sequiental step style program and I am receiving 4 error messages. I'm trying to understand why...

View Article


Compile error

Hi Everyone, Learning the ropes of SoMachine V4.2 (coming from Arduino and Ucontrollers), I am using a Sequiental step style program and I am receiving 4 error messages. I'm trying to understand why...

View Article

Modicon TSX P57102 Macdermid FlexLight 5280

Hi I am looking for some help. I'm not technical at all with this and came across this forum for plcs. I run a small business in Missouri and we purchased some equipment a few months back. It's a...

View Article

Image may be NSFW.
Clik here to view.

m221 somachine basic power on to set bit off

Hello. I have a m221 and use basic somaks to programe it. The problem is the following. I use %mw0:x0 to allocate a button on off HMI, If on the HMI press the button to set him "ON",and pull the...

View Article

PL7-2 installing

Hi Everybody. I have problem with install a PL7-2 software for programming TSX17 First installing a user interface from floppy is OK When I start installing a program then apperars error Fatal Error...

View Article


Vijeo XD V2.4, somachine V4.2, M241 PLC AND HMISTO735

Hello, I am try to connecting HMISTO735 with M241 PLC. The Magelis HMISTO735 software designation is Vijeo XD. Maybe somebody have experients how need connect HMI with PLC by somachine and vijeo xd...

View Article

M241 not seeing CanOpen VW3A3608

I have an application with a VW3A3608 communicating with a M241CEC24R. I've connected the two together with a CAT5 cable and connected CAN_H to Pin1, CAN_L to Pin 2 and CAN_Gnd to Pin3. The rest of...

View Article


Image may be NSFW.
Clik here to view.

KepServerEX and Modicon M211 Modbus TCP Problem

hi All, I am using KepServer EX V4.0 to read and write network objects ( %IWMx & %QWMx) of M221 PLC via Mobus TCP but it does not succeed although quality show good on OPC client meaning value of...

View Article

tsxcusb485+tsxcrjmd25 cable connection problem with Modicon Premium PLC

I am experiencing a  problem. I have purchased tsxcusb485+tsxcrjmd25 cable in order to communicate with a Modicon Premium TSXP57103 PLC. This is the cable according to Schneider Electric formal site...

View Article


TSX P57102

Hi, I posted a previous message regarding a TSX 102 but I got the plc number wrong. It should be TSX P57102. The rest of the message is the same. Can anybody help please.

View Article

schneider TSX P57203 SCADA + Monitor Pro

Hello. Please tell me, I have a device that works schneider TSX P57203 SCADA Works on a program Monitor Pro Schneider Electric, But the program Monitor Pro  has recently appeared on some problems And...

View Article

Concept 2.1 XL and TSX Compact E984

I’m new to PLCs and having an issue. I have Concept 2.1 XL, a project folder from the OEM (no .aac file),  and a TSX Compact PC-E984-265 in a PCI/Wedeco ozone generator. We are doing a hardware...

View Article
Browsing all 446 articles
Browse latest View live