EcoStruxure - Lexium32 power enable issue
Hi, i have a plc M262 Schneider and try with Schneider Ecostruxure to power enable a lexium32... Normally with SOMACHINE 4.3 i have no problem. Anybody have a ways?? Thanks
View ArticleM580 sd card install
Just received my blank Schneider sd card it's already formatted. Program is already on the M580 so if I insert, will it write the program to it automatically and save? or do I need to put the plc in...
View ArticleModicon TSX Micro 3721001 - CPU Fault - Modules or Base Unit?
Hello - we run a car wash that is controlled by a Modicon TSX Micro 3721001. It is indicating a CPU fault. I've attached a picture of the unit in place, with the LEDs lit. I have ordered a new base...
View ArticleCommunication
Hello. I am having 22 slaves communicating to a master on rs485 half duplex.i have selected baud rate as 38400 on a length of 800m.The problem is out of 22 devices only six are communicating .i have...
View ArticleModicon M241 Firmware
Dear All, TM241CE40R is installed with firmware 4.0.3.18 If I buy new CPU with some other firmware, will it work or I will need to change the firmware?
View ArticleCounting on time
Hello! Anyone have tips for getting a precise count in seconds for the «on time» of a input? water pump deliveres 20 l/min and input is feedback that its running. ive been trying with %s4-6 and input...
View ArticlePID or Not PID ! , Relaxc ?
Hi, I propose a free trial version of new methodology of process control ( Relaxc) under expert control of schneider. If you are a school, technician, student, or an industrial, you can test it and...
View ArticleClik here to view.
MachineExpert Vijeo Designer simulation
Hi guys, I installed new MachineExpert v1.2 and Vijeo 6.2.9 on Win10 machine. When connecting simulation PLC to Vijeo to test my application everything is good. I go to PLC and check the nodename (see...
View ArticleProblem with program HMIGTO5310 Versus XBTGT5320
Need your helps Guys, My XBTGT5320 was defective, then i want to replace with HMIGTO5310. My questions: 1. Can i use the old program (firmware V6.1), downloaded to new HMIGTO5310 (firmware V0.3)? How?...
View ArticleZelio Ethernet
Hi All, I’m trying to get 2 SR3B262BD’s to communicate with each other, using 2 Ethernet expansion modules, so that the inputs from one control the outputs of the other. Is this actually possible...
View ArticleIssue transferring project from Pro face HMI.
Hello, I am having an issue transferring a project from a Proface HMI Model: PS-3711A to my laptop. I am connected through ethernet and using the same subnet, when I load the Transfer tool from Win...
View ArticleProblem "Electric soft starter"
I have a digital soft starter altistart 48 telemecanique shneider, the problem is it works 10 seconds and turns off! I idont know why?!
View ArticleClik here to view.
Connection Between Two RIO panels
Dear Experts, I have two M580 remotes I/Os panel and CPU panel and I want to connect all by using BMXNRP0200 Fiber Converter modules. In IO panels the backplane is BME XBP 1200, after the CPS3500 at...
View ArticleLee
Hi ya, can someone please advise if it is possible to add a text box that the user can enter a name / description to. I am hoping the user can select the text box and a pop up keyboard will appear...
View ArticleSerial Output
Hello. I am new to programming with a Modicon 340. I would like a serial output to a printer (or an LCD screen) (eg) an input is registered and I would like an output to display the results of the...
View Articlecitect message function
Please help me to change the font size in 'message ()' function of citect cicode
View ArticleExcel Export of Alarms in Citect SCADA 7.50.
Hello, I am new to Scada Programming. I am using Citect scada V7.50. I have completed whole project, but I am unable to generate Excel report for Alarms generated during run time. Please help me for...
View Articleschneider M580
Hello, I would like to replace my DRA1605 output module (faulty, ERR light on) on my M580, can I turn my PLC off without losing the program and data. thanks in advance
View ArticleUnity pro Upload simple question
Qucik question guys, im a noob on Unity Pro and was wondering if uploading a project off of a plc already running a program will affect the operation of the already program?
View ArticleProworx32 and Remote Rack Power supplies
Hi, Have on older Quantum PLC that I am new to and had to change out power supplies. We had redundant 140CPS12400 power supplies and one was failing in service and was alarming constantly to our DCS...
View Article